کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1429075 | 987163 | 2013 | 6 صفحه PDF | دانلود رایگان |
Naproxen membrane electrodes based on different plasticizers and quaternary ammonium salt tetraoctylammonium (S)-6-methoxy-α-methyl-2-naphthaleneacetate (NAP–TOA) were prepared. The electrode response to naproxen has the sensitivity of − 59.2 mV decade− 1 over the linear range of 10− 4–10− 1 mol L− 1 and limit of detection 1.80 × 10− 5 mol L− 1. This electrode has a response time 15–20 s and can be used in the pH range 5.5–9.5. The selective coefficients were determined in relation to some organic and inorganic anions and excipients of pharmaceuticals. The notable property and attractive quality of the naproxen electrode are low cost, comfortable application and very long lifetime—about 20 months. The electrode was successfully applied for determination of naproxen in urine samples and pharmaceuticals by the calibration curve method and standard addition method. The obtained results are comparable and sometimes better than those obtained by pharmacopoeial method.
Figure optionsDownload as PowerPoint slideHighlights
► The new naproxen ion‐selective electrode based on ion-pair complex was prepared.
► The electrode exhibits favourable analytical parameters.
► Limit of detection is 1.80 × 10− 5 mol L− 1. The notable property is high selectivity, low cost, and very long lifetime—20 months.
► The electrode was applied for determination of naproxen in drugs and urine samples.
Journal: Materials Science and Engineering: C - Volume 33, Issue 1, 1 January 2013, Pages 311–316