Fabrication of an iron(III) PVC-membrane sensor based on bis-benzilthiocarbohydrazide as a selective sensing material

The construction, performance characteristics, and application of a novel iron(III) membrane sensor based on a new bis-benzilthiocarbohydrazide (BBTC) are reported in this paper. The sensor is prepared by incorporating of BBTC, nitrobenzene (NB), and sodium tetraphenyl borate (NaTPB) into a plasticized poly(vinyl chloride) membrane. The electrode reveals a Nernstian behavior over a wide iron ion concentration range (1.0 × 10− 2–1.0 × 10− 7 mol L− 1), and relatively low detection limit (8.6 × 10− 8 mol L− 1). The potentiometric response is independent on the pH of the solution in the range of 1.6–4.3. The electrode shows a very short response time (< 10 s). The proposed electrode can be used for at least nine weeks without any considerable divergence in potentials. It exhibits very good selectivity relative to a wide variety of alkali, alkaline earth, transition and heavy metal ions. In fact, the selectivity of the proposed sensor shows great improvements compared to the previously reported electrodes for the iron ion. Also, the sensors accuracy was investigated in two ways: (i) with the potentiometric titration of a Fe(III) solution with EDTA and (ii) with the Fe(III) monitoring in river and wastewater samples.