Joining partially-sintered alumina ceramics using a mixture slurry of alumina sol and suspension

The joining of advanced ceramics allows the manufacture of components with a range of complex shapes that cannot be achieved in a cost-effective manner using existing techniques, i.e. green state shaping and/or machining. A new technique for joining partially-sintered alumina ceramics was developed by simply using a mixed slurry of Al2O3 sol and suspension. The interlayer of the joints had the same composition as the parent bodies, and the mechanical and chemical properties of the joint were comparable to those of the bulk material. This process can be applied to the joining of a variety of advanced ceramics.