کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
146978 | 456383 | 2014 | 8 صفحه PDF | دانلود رایگان |
• The novel method to prepare nitrogen-doped TiO2 nanoparticles is continuous and high yield.
• The N elements are doped near the surface and O–Ti–N structures are formed.
• The doped nitrogen not only enhance the adsorption in visible light, but also suppress the charge recombination in DSCs.
• Improved DSCs performance of NSND-TiO2 has been observed.
A novel rapid and continuous process has been designed to synthesize near surface nitrogen doped TiO2 (NSND-TiO2) using a modified flame spray pyrolysis (FSP) equipment. NSND-TiO2 was obtained by simply introducing a spray of ammonia water above the flame in which TiO2 nanoparticles were just formed. The introduction of N elements into TiO2 nanocrystalline results in a reducing of energy band gap to 2.90 eV and a strong enhance of visible light absorption. The generation structure of O–Ti–N in NSND-TiO2 can suppress the charge recombination at the TiO2/dye/electrolyte interface. These properties can improve the short-circuit current (Jsc) and open-circuit voltage (Voc) of dye sensitized solar cells (DSCs), and the DSCs of NSND-TiO2 electrode exhibits a power conversion efficiency of 6.03%, much higher than that of undoped TiO2. This work provides a high yield and promising method to prepare NSND-TiO2 nanoparticles with improved DSCs performance.
A novel rapid and continuous process has been designed to synthesize near surface nitrogen doped TiO2 (NSND-TiO2) using a modified flame spray pyrolysis (FSP) equipment. NSND-TiO2 was obtained by simply introducing a spray of ammonia water above the flame in which the TiO2 particles were just at the condensation stage. The introduction of N elements to TiO2 nanocrystalline results in a reducing of energy band gap to 2.90 eV and a strong red shift to the visible light region. The generation structure of O–Ti–N in NSND-TiO2 can suppress the charge recombination at the TiO2/dye/electrolyte interface. These properties can improve the short-circuit current (Jsc) and open-circuit voltage (Voc) of dye sensitized solar cells (DSCs), and in a result DSCs of NSND-TiO2 electrode exhibits a power conversion efficiency of 6.03%, much higher than that of undoped TiO2 photoelectrode. This work provides a high yield and promising method to prepare NSND-TiO2 nanoparticles with improved DSCs performance.Figure optionsDownload as PowerPoint slide
Journal: Chemical Engineering Journal - Volume 258, 15 December 2014, Pages 163–170