کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
148260 456408 2013 14 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Optimization of surface imprinted layer attached poly(vinylidene fluoride) membrane for selective separation of salicylic acid from acetylsalicylic acid using central composite design
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
Optimization of surface imprinted layer attached poly(vinylidene fluoride) membrane for selective separation of salicylic acid from acetylsalicylic acid using central composite design
چکیده انگلیسی


• Molecularly imprinted membrane was synthesized to selectively separate SA from ASA.
• The types and amount of the polymer layer on MIM affected the separation effect.
• 4-VP–MIM exhibited excellent recognition selectivity for SA.
• Response surface methodology was used to study the dynamic separation process.

Highly selective molecularly imprinted membranes (MIM) for salicylic acid (SA) were synthesized with methacrylic acid (MAA), acrylamide (AM) or 4-vinylpyridine (4-VP) as the functional monomer, respectively based on the poly(vinylidene fluoride) microfiltration membrane. Fast kinetic equilibrium for the rebinding of SA was found on all the imprinted membranes. Comparing with MAA–MIM and AM–MIM, the 4-VP–MIM presented stronger adsorption capacity and higher permeation selectivity for SA due to the formation of ionic bond between SA and 4-VP. The separation effect on SA and acetylsalicylic acid (ASA) were strongly affected by the amount of polymer layers on the MIM. The experimental data were well fitted to a second-order polynomial equation using multiple regression analysis and also analyzed by analysis of variance (ANOVA). Response surface methodology was employed to investigate the best combination of separation conditions in the dynamic separation process. The optimal conditions for the separation of SA from ASA were as follows: the SA concentration of 10 mg L−1, the temperature of 10 °C and the flow rate of 1 mL min−1. Under these conditions, the experimental separation factor of SA and ASA was 10.24 ± 1.06%, which was close to the predicted separation factor.

Highly selective molecularly imprinted membranes (MIM) for salicylic acid (SA) was synthesized to separate SA from aspirin(ASA) for the first time. Selective transport for permeation of the SA and ASA towards the PVDF imprinted membrane.Figure optionsDownload as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chemical Engineering Journal - Volume 231, September 2013, Pages 132–145
نویسندگان
, , , , , , , ,