کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
149171 456428 2012 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Alumina coatings on silica powders by Fluidized Bed Chemical Vapor Deposition from aluminium acetylacetonate
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
Alumina coatings on silica powders by Fluidized Bed Chemical Vapor Deposition from aluminium acetylacetonate
چکیده انگلیسی

A SiO2 powder has been coated by alumina using the Fluidized Bed Chemical Vapor Deposition process and a metal organic precursor, aluminium acetylacetonate (Al(acac)3 or C15H21AlO6) as single source. A range of low temperatures, i.e. 400–620 °C has been explored at atmospheric pressure. Systematic characterizations were performed by Field Emission Gun Scanning Electron Microscopy (FEG-SEM) coupled with Energy Dispersive X-ray Spectroscopy (EDS), Fourier Transform Infra-Red (FT-IR) spectroscopy and Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES). The process involves a first step of gas phase reactions producing reactive intermediates, themselves leading to Al2O3 and carbon containing deposits. Between 400 and 500 °C, the deposits are lamellar and constituted of mixtures of Al2O3, non-decomposed Al(acac)3 and impurities, leading to a C/Al molar ratio close to 2. For this range of temperature, the precursor is not totally decomposed and the limiting parameter of the process is the deposition temperature. For 600 and 620 °C, the deposits are nodular and mainly formed of Al2O3 and acetylacetone C5H8O2, one of the main intermediate species formed in the gas phase. The Al(acac)3 decomposition seems to be complete, but a deposition temperature of 620 °C is not high enough to allow a complete decomposition of carbon ligands of the chemisorbing intermediate species. For these conditions, the C/Al molar ratio increases with the deposition temperature, to reach values between 4 and 6, in agreement with the observed darker colors of the deposits.


► The Fluidized Bed Chemical Vapor Deposition process has been studied to coat SiO2 powder by alumina.
► A metal organic precursor, aluminium acetylacetonate Al(acac)3 has been used as single source.
► Between 400 and 500 °C, the deposits are formed of Al2O3, non-decomposed Al(acac)3 and impurities.
► At 600 and 620 °C, the deposits are mainly formed of Al2O3 and acetylacetone C5H8O2.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chemical Engineering Journal - Volumes 211–212, 15 November 2012, Pages 68–76
نویسندگان
, , , , ,