Biosorption of Pb(II) ions from aqueous solution by pine bark (Pinus brutia Ten.)

The biosorption potential of pine (Pinus brutia Ten.) bark in a batch system for the removal of Pb(II) ions from aqueous solutions was investigated. The biosorption characteristics of Pb(II) ions on the pine bark was investigated with respect to well-established effective parameters including the effects of solution pH, initial Pb(II) concentration, mass of bark, temperature, and interfering ions present, reusability, and desorption. Initial solution pH and contact time were optimized to 4.0 and 4 h, respectively. The Langmuir and Freundlich equilibrium adsorption models were studied and observed to fit well. The maximum adsorption capacity of the bark for Pb(II) was found to be 76.8 mg g−1 by Langmuir isotherms (mass of bark: 1.0 g L−1). The kinetic data fitted the pseudo-second-order model with correlation coefficient greater than 0.99. The thermodynamic parameters Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) changes were also calculated, and the values indicated that the biosorption process was spontaneous. Reutilization of the biosorbent was feasible with a 90.7% desorption efficiency using 0.5 M HCl. It was concluded that pine bark can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Pb(II) ions from aqueous solution.