کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1583716 1514890 2007 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Development of a 3-D thermal model of the low-pressure die-cast (LPDC) process of A356 aluminum alloy wheels
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
Development of a 3-D thermal model of the low-pressure die-cast (LPDC) process of A356 aluminum alloy wheels
چکیده انگلیسی

A mathematical model of the low-pressure die casting process for the production of A356 aluminum alloy wheels has been developed to predict the evolution of temperature within the wheel and die under the auspices of a collaborative research agreement between researchers at the University of British Columbia and a North American wheel casting facility. The heat transfer model represents a three-dimensional, 30° slice of the wheel and die, and was developed within the commercial finite-element package, ABAQUS. Extensive temperature measurements in the die and in the wheel taken over several cycles in the casting process were used to develop key process boundary conditions and validate the model. The predicted and measured temperatures agree very well, with the maximum difference less than 20 °C at the majority of locations examined. A heat flux analysis conducted with the model has identified the complex path that the heat follows within the die and wheel during the solidification process. A solidification path analysis conducted with the model showed the presence of a hot spot in the rim/spoke junction area, which was confirmed by the observation of macro-porosity in a sectioned wheel.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 464, Issues 1–2, 25 August 2007, Pages 295–305
نویسندگان
, , ,