کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1605645 | 1516214 | 2016 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Mechanical properties and corrosion behavior of the nitriding surface layer of Ti6Al7Nb using large pulsed electron beam (LPEB)
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Large pulsed electron beam (LPEB) irradiation was used as a single surface finishing process for TiAl7Nb. Nitrogen plasma gas and cathodic apparatus have been adopted to induce nitriding effect of Ti6Al7Nb during the electron beam irradiation. The atomic concentration of nitrogen atoms at the re-solidified layer could be achieved up to â¼18% by LPEB nitriding. Nano-hardness in the re-solidified layer was improved by â¼75% following the irradiation process, as a result of a phase transformation and the formation of TiN. The re-solidified layer induced by the LPEB nitriding, consisted of TiN, TiO2, and TiOxNy, indicated significantly modified corrosion resistance showing a nobler corrosion potential, decreased corrosion current density, and improved charge transfer resistance. The increasing fraction of TiN at the re-solidified layer, induced by LPEB nitriding, was suggested as being responsible for remarkable improvement of mechanical properties and corrosion resistance, embedding uniformly noble and stable characteristics at the top surface. The corrosion-resistant surface layer with superior mechanical properties on Ti6Al7Nb has been successfully demonstrated by LPEB nitriding technique.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 679, 15 September 2016, Pages 138-148
Journal: Journal of Alloys and Compounds - Volume 679, 15 September 2016, Pages 138-148
نویسندگان
Jisoo Kim, Woo Jin Lee, Hyung Wook Park,