Characterization and corrosion behavior of ceramic coating on magnesium by micro-arc oxidation

In this study, the commercial pure magnesium was coated in different aqueous solutions of Na2SiO3 and Na3PO4 by the micro-arc oxidation method (MAO). Coating thickness, phase composition, surface and cross sectional morphology and corrosion resistance of coatings were analyzed by eddy current method, X-ray diffraction (XRD), scanning electron microscope (SEM) and tafel extrapolation method, respectively. The average thickness of the coatings ranged from 52 to 74 μm for sodium silicate solution and from 64 to 88 μm for sodium phosphate solution. The dominant phases on the coatings were detected as spinal Mg2SiO4 (Forsterite) and MgO (Periclase) for sodium silicate solution and Mg3(PO4)2 (Farringtonite) and MgO (Periclase) for sodium phosphate solution. SEM images reveal that the coating is composed of two layers as of a porous outer layer and a dense inner layer. The corrosion results show the coating consisting Mg2SiO4 is more resistant to corrosion than that containing Mg3(PO4)2.

• The commercial pure magnesium was coated by micro-arc oxidation method.
• The coating is composed of two layers, a porous outer layer and a dense inner layer.
• A super corrosion resistance was achieved with MAO coatings.
• Coating with Mg2SiO4 is more resistant to corrosion than that containing Mg3(PO4)2.