کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1619507 | 1005721 | 2011 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Parametric optimization of Ti-Ni powder mixtures produced by mechanical alloying
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Parametric optimization of Ti-Ni powder mixtures produced by mechanical alloying Parametric optimization of Ti-Ni powder mixtures produced by mechanical alloying](/preview/png/1619507.png)
چکیده انگلیسی
ⶠTi-50 at.% Ni elemental powder mixtures were processed through mechanical alloying (MA). ⶠA design of experiments, based on the Taguchi method, was applied to optimize the MA parameters. ⶠWithin the milling energy range used, the milling time had bigger contribution than the milling speed (74% vs 25%) for the suppression of the high temperature reaction. ⶠCrystalline phases and an amorphous phase coexisted in the mechanically alloyed powders. ⶠWith MA a lamellar microstructure constituted by alternated nanolayers of Ni and Ti was produced.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 509, Supplement 1, June 2011, Pages S271-S274
Journal: Journal of Alloys and Compounds - Volume 509, Supplement 1, June 2011, Pages S271-S274
نویسندگان
F. Neves, F.M. Braz Fernandes, I. Martins, J.B. Correia,