کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1620970 | 1005741 | 2010 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of thermal cycling treatment on the anneal hardening effect of Cu–10Zn Alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Influence of thermal cycling treatment on the anneal hardening effect of Cu–10Zn Alloy Influence of thermal cycling treatment on the anneal hardening effect of Cu–10Zn Alloy](/preview/png/1620970.png)
چکیده انگلیسی
This paper reports the results of investigations on the influence of the so called thermal cycling treatment on the anneal hardening effect of the copper-based Cu–10 at.% Zn alloy. The quenched samples were subjected to cold rolling of 20, 40 and 60% in reduction, followed by annealing with and without thermocycling treatment below the recrystallization temperature. Anneal hardening effect was observed in both samples in the temperature range between 180 and 300 °C and was followed by an increase in the hardness and electrical conductivity. These investigations showed that the thermal cycling treatment some increased the intensity of anneal hardening effect.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 489, Issue 2, 21 January 2010, Pages 582–585
Journal: Journal of Alloys and Compounds - Volume 489, Issue 2, 21 January 2010, Pages 582–585
نویسندگان
Svetlana Nestorović, Desimir Marković, Ivana Marković,