کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1626894 | 1516452 | 2006 | 10 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Microstructure and electrochemical performance of vanadium-containing AB5-type low-Co intermetallic hydrides Microstructure and electrochemical performance of vanadium-containing AB5-type low-Co intermetallic hydrides](/preview/png/1626894.png)
The effects of the vanadium substitution for nickel on the microstructure and electrochemical behaviors of as-cast and melt-spun compounds of Mm(NiCoMnAlV)5 with low Co content were studied at −20 to 80 °C. The substitution of V improved the capacity and cycling stability of the compounds. Melt-spinning reparation enhanced the cycling stability significantly due to the change of the microstructures. Phase structure analysis and SEM observation shows that the substitution of V for Ni plays an important role in suppressing the crystal grain growth and increasing texture. The melt-spinning technique is favorable to the formation of the fine columnar structure. ICP-AES analysis indicates that the corrosive resistance of the compounds is improved remarkably by the melt-spinning technique. In addition, the substitution of V for Ni and melt-spinning preparation increased the electrochemical capacity at higher temperature (more than 60 °C) due to high potential difference between hydride-formation and hydrogen evolution reactions and the decrease in the charge transfer impedance, while the reduced capacity at lower temperature (less than 0 °C) owing to the lower hydrogen evolution potential and earlier hydrogen evolution reaction as well as lower hydrogen diffusion coefficient.
Journal: Journal of Alloys and Compounds - Volume 421, Issues 1–2, 14 September 2006, Pages 258–267