The air–water sloshing problem: Fundamental analysis and parametric studies on excitation and fill levels

The problem of liquid sloshing has gained recent attention with the proliferation of liquefied natural gas (LNG) carriers transporting liquids in partially filled tanks. Impact pressures caused by sloshing depend on the tank fill level, period and amplitude of oscillation of the tank. In this paper, we first present the rudiments of a linear potential theory for sloshing motions in a two-dimensional rectangular tank, due to small amplitude sway motions. Although this topic is fundamental, we clarify inconsistencies in the published literature and texts.Numerical investigations were carried out on the sloshing motions in a two-dimensional tank in the sway excitation. The fluid domain was modeled using a finite volume approximation, and the air–water interface was tracked using a volume-of-fluid (VOF) technique. Computational results for free surface elevation and impact pressure are found to be in good agreement with theory and published data. The fill levels were varied from 10% to 95%, and the excitation time periods were varied from 0.8 to 2.8 s for a constant sway amplitude of 0.25 m (peak–peak) at 1:30 scale. The results of the parametric study are compared with theoretical predictions and suggestions are made on incorporating sloshing effects in standard seakeeping analysis for LNG carriers.