Driving cycle developments and their impacts on energy consumption of transportation

To date, there has been little discussion about Driving Cycle developments, so in this paper, experimental studies, which predict sufficient parameters in driving cycle modelling, were summarized in the literature review and gave comprehensive feedback to the field for further investigations. Subsequently, the author presented a simple method for establishing the driving cycle, and estimating vehicle emission. As COPERT software is one of the most commonly deployed tools in Europe, the methodology involved a formula that is being obtained from COPERT. Later this formula is being used in a program which makes use of bulk traffic movements and average vehicle speeds in order to estimate emissions. The combination of On-board diagnostic data extraction incorporated in all modern passenger cars and program used to allow real world vehicular activities to be recorded, in order to better estimate the contribution of private cars to local emissions inventories. Representative driving cycles reflecting the real-world driving conditions of two cities were proposed and estimated vehicle emissions were compared with measured results.