کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1754836 1522809 2015 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Optimal spacing of staged fracturing in horizontal shale-gas well
ترجمه فارسی عنوان
فاصله مطلوب شکستگی در فاز شیلنگ افقی
کلمات کلیدی
ترجمه چکیده
مخازن شیل دارای نفوذپذیری پایین و یا بسیار کم و تخلخل هستند و نیاز به دستیابی به میزان تولید اقتصادی با ایجاد شبکه شکستگی دارند. گمان می رود فاصله بین شکستگی عامل اصلی موفقیت در تکمیل چاه های افقی است. افتادن یک شکاف عرضی پیش بینی شده در چاه های افقی موجب تغییر جهت تنش های موضعی در محدوده آن می شود، که به نوبه خود بر ایجاد و توزیع شکستگی های استرس تسکین تأثیر می گذارد. در این مقاله میزان بازنشستگی استرس برای چاه افقی شکست خورده محاسبه شده است و با استفاده از مدل عددی دو بعدی مداخله تنش ناشی از ایجاد شکستگی پیشانی انجام شده است. شکستگی در شکاف افقی در شبیه سازی شده بر اساس توالی جایگزینی شکستگی های عرضی شبیه سازی شده است. با نقشه زاویۀ شکستگی های استرس تسریع شده توسط مراحل مختلف شکستگی، محدوده ی شبکه را محاسبه می کنیم که در آن تقاطع شکستگی های استرس تسکین یافته است. نتایج ما نشان می دهد که منطقه شبکه دارای مقدار پیک با فاصله متفاوت شکست است و بنابراین فاصله مربوط به فاصله شکستن مطلوب است. اثر کنتراست موضعی در محل و فشار خالص بر روی فاصله شکست مطلوب مورد بررسی قرار گرفته است. نشان داده شده است که فاصله ی شکست یابی با افزایش انجماد نسبی تنش یا فشار خالص بیشتر افزایش می یابد. در نهایت، اثر پروپاننت بر روی فاصله مطلوب مورد بررسی قرار می گیرد. نتایج ارائه شده در این مقاله می تواند بینش جدیدی در مورد طرح های اتمام ارائه دهد، مانند بهینه سازی فاصله شکست و بهبود رسانندگی ماتریس سنگ.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات زمین شناسی اقتصادی
چکیده انگلیسی
Shale reservoirs have low or ultra-low permeability and porosity, and require achieving economic production rates by creating fracture network. The spacing between fractures is thought to be a major factor in the success of horizontal well completions. The opening of a propped transverse fracture in horizontal wells causes a reorientation of in-situ stresses in its neighborhood, which in turn affects the creation and distribution of stress-relief fractures. In this paper, the extent of stress reorientation has been calculated for fractured horizontal well using two-dimensional numerical model of the stress interference induced by the creation of propped fracture. Staged fracturing in horizontal well is simulated based on an alternate sequencing of transverse fractures. By mapping the angle of stress-relief fractures generated by different fracture stages, we calculate the network area that is the extent of the intersection of stress-relief fractures. Our results demonstrate that the network area has a peak value with the varying fracture spacing and therefore, the associated spacing is optimal fracture spacing. The effect of in-situ stress contrast and net pressure on the optimal fracture spacing has been investigated. It is shown that optimal fracture spacing will increase with lower stress anisotropy or larger net pressure. Finally, the effect of proppant on optimal spacing is investigated. The results presented in this paper can offer some new insights on the completion designs, such as optimizing fracture spacing and improving the conductivity of rock matrix.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Petroleum Science and Engineering - Volume 132, August 2015, Pages 86-93
نویسندگان
, , , , ,