کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1754858 1522814 2015 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Initiation and propagation of wormhole in unconsolidated rock matrix induced by long-term water injection
ترجمه فارسی عنوان
آغاز و انتشار کرمچاله در ماتریس سنگ ناحیه ای ناشی از تزریق آب درازمدت
کلمات کلیدی
ترجمه چکیده
آغاز و انتشار کرمچاله در نزدیکی چاه در طی تزریق آب از طریق شبیه سازی اجزای محدود انجام شد. برای توصیف این مشکل، یک مدل تلفیقی چند فیزیک، که در آن هیدرودینامیک، ژئومکانیک و فرسایش ترکیب شده بود، ساخته شد. با ساخت یک مدل مخزن با تخلخل تصادفی و غیر همجوار، این مطالعه نشان داد که تخلخل اولیه نقش مهمی در هندسه و جهت تکامل کرمچاله ایفا می کند. اثرات بر میزان فرسایش و کرمچاله تحت بررسی پارامترهای مانند جریان جریان، ضریب فرسایش و فشار منافذ مشخص شد. علاوه بر این، حفره چاه با چند نفوذ برای بررسی تأثیرات احتمالی بین سوراخهای ناشی از جریان دارسی مورد مطالعه قرار گرفت. نتایج شبیه سازی نشان می دهد که کرم چاله بیشتر در اطراف سوراخ های طولانی شکل می گیرد. با افزایش زاویه بین دو سوراخ، کرمچاله در اطراف حفره سوراخ ها بیشتر شکل می گیرد در حالی که کرمچاله در اطراف چاه تخلیه شده است. این کار بینش را برای هدایت طراحی الگوی سوراخدار و کاربرد تزریق از لحاظ بهینه سازی تولید هیدروکربن فراهم می کند.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات زمین شناسی اقتصادی
چکیده انگلیسی
The initiation and propagation of wormhole near the wellbore during the process of water injection was investigated through finite element simulations. To describe the problem, a multi-physics coupling model, in which hydrodynamics, geomechanics and erosion were coupled, was built. By constructing a reservoir model with stochastic and inhomogeneous porosity this study found that the initial porosity plays an important role in the geometry and evolution direction of wormhole. The effects on the erosion rate and wormhole area under the consideration of parameters such as flow flux, erosion coefficient and pore pressure were elucidated. Furthermore, wellbore with multi-perforations was studied to investigate possible interactions between the perforations due to Darcy flow. The simulation results show that the wormhole is more likely to form around the longer perforations. With the increase of the angle between two perforations, the wormhole around the cusp of perforations is more likely to form while the wormhole around the wellbore is restrained. This work provides an insight to guide the design of perforation pattern and application of injection in terms of optimization of the hydrocarbon production.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Petroleum Science and Engineering - Volume 127, March 2015, Pages 93-100
نویسندگان
, , , , ,