Operating characteristics of contactless power transfer for electric vehicle from HTS antenna to normal conducting receiver

As contactless power transfer (CPT) technology using strongly coupled electromagnetic resonators is a recently explored technique to realize the large power delivery and storage without any cable or wire, this technique is required for diffusion of electric vehicles (EVs) since it makes possible a convenient charging system. Typically, since the normal conducting coils are used as a transmitting coil in the CPT system, there is limited to deliver the large power promptly. From this reason, we proposed the combination CPT technology with HTS transmitting antenna, it is called as, superconducting contactless power transfer for EV (SUCPT4EV) system. As the HTS coil has an enough current density and high quality factor Q value, it can deliver a mass amount of electric energy and improved efficiency in spite of a small scale antenna. The SUCPT4EV system has been expected as a reasonable option to improve the transfer efficiency of large electric power. In this study, we examined the improvement of transmission efficiency and properties for HTS transmitted antenna coils within 40 cm distance at radio frequency (RF) generator of 60 W, 370 kHz. In addition, we achieved impedance matching conditions for different material coils between HTS and normal conductors.