Potential of Nd:YAG pulsed laser deposition method for coated conductor production

A Nd:YAG laser is environmentally safe and economical with no poisonous or hazardous gases and no expensive gases. We prepared Y123 films by using the fourth harmonic Nd:YAG pulsed laser deposition (PLD) method and optimized the deposition conditions on MgO single crystalline substrates and IBAD-MgO substrates for Y123 coated conductor. We found that the optimal deposition conditions acquired bi-axially aligned Y123 films on both substrates with Tc ∼ 90 K and Jc > 1 MA/cm2 at 77 K in self-field. For obtaining high Ic, we fabricated thick Y123 films on both substrates and the maximum Ic per 1 cm in width reached 186 A/cm-width on the IBAD-MgO substrate. Interestingly, there were no a-axis oriented grains within the films up to 1.8 μm thick. This might be an especial feature of the Nd:YAG-PLD method. We believe that the Nd:YAG-PLD method is promising method for RE123 coated conductor production.