A highly sensitive non-enzymatic glucose sensor based on nickel and multi-walled carbon nanotubes nanohybrid films fabricated by one-step co-electrodeposition in ionic liquids

In this paper, nickel was combined with multi-walled carbon nanotubes (Ni–MWNTs) to fabricate nanohybrid films on a conventional glassy carbon electrode using simultaneous electrodeposition of NiCl2 and the MWNTs in ionic liquids (ILs). The morphologies and elemental compositions of the nanohybrid films were investigated with scanning electron microscopy and energy dispersive spectroscopy. A novel non-enzymatic glucose sensor based on the Ni–MWNT nanohybrid film-modified glassy carbon electrode was described, and its electrochemical behaviors were investigated. The proposed sensor exhibited high electrocatalytic activity and good response to glucose. Under optimal conditions, the sensor showed high sensitivity (67.2 μA mM−1 cm−2), rapid response time (<2 s) and a low detection limit (0.89 μM; signal/noise ratio of 3). In particular, the upper glucose concentration limit produced a linear response of 17.5 mM. Thus, the Ni–MWNT nanohybrid films represent promising sensor materials for non-enzymatic glucose sensing in routine analyses.

Cyclic voltammograms of Ni–MWNTs/GCE at different concentrations of glucose.Figure optionsDownload as PowerPoint slideHighlights
► Ni –MWNT nanohybrid film was successfully synthesized and characterized by SEM and EDS.
► The mechanism of glucose at Ni –MWNT nanohybrid film was evaluated and the upper glucose concentration limit produced a linear response of 17.5 mM.
► Simple of preparation and good analytical response made nanohybrid films a promising sensor material for non-enzymatic glucose sensing in routine analysis.