Linear viscoelasticity characterization of egg albumen/glycerol blends with applications in material moulding processes

The effect of composition, storage conditions and temperature over the rheological properties of dough-like materials prepared within a mixing-rheometer was studied using different egg albumen protein/glycerol ratios: 50/50, 60/40 and 65/35. As protein/glycerol ratio increases from 50/50 to 65/35, the mechanical spectra display a dramatic increase (i.e. 15,000-fold in the storage modulus at 1 rad/s), as a greater degree of structuration is achieved. An evolution from a predominantly viscous behaviour into a predominantly elastic one is also observed (i.e. the loss tangent shifts from 1.9 to 0.3 at 1 rad/s).When the viscoelastic properties were studied along ageing, a relaxation related minimum was found at relatively short times, which could define the optimal condition for bioplastic processing (e.g. injection moulding). Freezing also plays an important role by inhibiting ageing and strongly retarding the evolution of G′ and G″ along ageing time after thawing. When samples are submitted to a thermal treatment up to 90 °C, a minimum is always found both in G′ and G″ that takes place at lower temperature as the protein/glycerol ratio increases (from 62 to 49 °C).

Figure optionsDownload high-quality image (102 K)Download as PowerPoint slideHighlights
► Rheological analysis may be useful to select injection moulding process conditions.
► Higher protein/glycerol ratios lead to enhanced gel strengths.
► Ageing may yield weakening and a minimum in rheological properties of blends.
► Freezing inhibits ageing and retards further evolution of thawed samples.
► A minimum appears in the rheological properties when temperature is raised up.