Improved photovoltage and performance by aminosilane-modified PEO/P(VDF-HFP) composite polymer electrolyte dye-sensitized solar cells

A PEO/P(VDF-HFP) composite polymer electrolyte was modified by different amounts of NH2-end functional silane (3-amonopropyltriethoxysilane, APTS). Fourier transform infrared (FT-IR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC) were carried out to examine the configuration changes of the polymer electrolyte. The newly formed Si–O–Si network and interactions influenced the ionic conductivity of the APTS-modified polymer electrolyte and also enhanced the connection of the polymer electrolyte with the electrodes of the dye sensitized solar cells (DSSCs). The cyclic voltammograms and electrochemical impedance measurements indicated that the APTS deprotonated the TiO2 photoanode surface and negatively changed the Fermi energy level and the conduction band edge to the vacuum level. This effectively reduced the interface recombination in the DSSC and improved the open circuit voltage. With moderate APTS content (0.1 M) modification, the DSSC exhibited a 58 mV improvement of photovoltage and an improved performance of 5.08% compared with 3.74% of the original DSSC.