Metal separators coated with carbon/resin composite layers for PEFCs

A new type of metal separator coated with corrosion-resistant and electronically conductive carbon/resin composite layers has been developed. A flat, stainless steel plate was coated with a thin composite layer, and then ribs were formed of a similar composite over the thin layer as gas flow channels. The composite consisted of graphite, epoxy resin and a phenol hardener. By optimizing the combination and composition of materials, target values for the bulk electric conductivity and the chemical stability in hot water were cleared. The separator pieces exhibited a good corrosion resistance during soaking tests in 0.1 M H2SO4 at 90 °C over 2000 h or even at 120 °C over 1200 h. The area-specific resistance of the separator coated with the thin protecting layer and the rib layer was less than 13.8 mΩ cm2.