Immobilization of dehydrogenase onto epoxy-functionalized nanoparticles for synthesis of (R)-mandelic acid

Epoxy functionalized magnetic Fe3O4@SiO2 nanoparticles were successfully prepared and characterized by Fourier-transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The prepared nanoparticles were used for immobilization of alcohol dehydrogenase (ADH) from Saccharomyces cerevisiae by covalent attachment. The optimal immobilization conditions were obtained as follows: enzyme/support 4.49 mg/g, pH 8.0, buffer concentration 0.05 M, time 12 h and temperature 30 °C. Under these conditions, a high immobilization yield and efficiency of above 92% were obtained after the optimization. Broad pH tolerance and high thermostability were achieved by the immobilization. The immobilized ADH retained about 84% initial activity after five cycles. Kinetic parameters Vmax and Km of free and immobilized ADH were determined as 56.72 μM/min, 44.27 μM/min and 11.54 mM, 31.32 mM, respectively. (R)-mandelic acid synthesis with the immobilized ADH was carried out, and the yield of (R)-mandelic acid was as high as 64%. These results indicate that the ADH immobilized onto epoxy-functionalized nanoparticles is an efficient and simple way for preparation of stable ADH, and the immobilized ADH has potential applications in the production of (R)-mandelic acid.