Monitoring nisin desorption from a multi-layer polyethylene-based film coated with nisin loaded HPMC film and diffusion in agarose gel by an immunoassay (ELISA) method and a numerical modeling

Polyethylene-based films coated with nisin loaded HPMC films were put in contact with food simulants, i.e. agarose gels with 5 or 30% (w/w) fat. Nisin desorption from the multi-layer films and diffusion in agarose gels were monitored by ELISA (Enzyme Linked ImmunoSorbent Assay). The data obtained after 2 or 6 days of contact between antimicrobial films and agarose gels were employed to determine nisin mass transfer by numerical modeling following Fick's second law. The values were in the range from 0.87 × 10− 3 m s− 1 to 4.30 × 10− 3 m s− 1 and 6.5 × 10− 11 m2 s− 1 to 3.3 × 10− 10 m2 s− 1, for nisin apparent desorption and diffusion coefficients, respectively. The diffusion process was governed by interactions between food matrix simulant and nisin. Moreover, it was observed that the polymer in the coating did not modify plastic film initial mechanical resistance and water vapor permeability.Industrial relevanceThis paper concerns active packaging, considered as a new approach to preserve food shelf life. Active packaging is a real gain for plastic and Food industrials. The paper deals with coating as a manner to activate packaging. The impact of coating on film properties is investigated.Also, predictive models are proposed to determine antimicrobial agent desorption and diffusion during some storage conditions.