کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
215280 | 1426233 | 2015 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Liquid density of oxygenated additive 2,4-dimethyl-3-oxapentane at pressures up to 140 MPa and temperatures from (293.15 to 393.29) K Liquid density of oxygenated additive 2,4-dimethyl-3-oxapentane at pressures up to 140 MPa and temperatures from (293.15 to 393.29) K](/preview/png/215280.png)
• New density data for di-isopropyl ether are reported.
• The pressure and temperature intervals are (0.1 to 140) MPa and (293.15 to 393.29) K.
• 158 measured data points were fitted to a Tait-like equation.
• Experimental data points have been compared to Cibulka’s correlation.
• The isobaric expansivity and the isothermal compressibility have been derived.
This work reports new density measurements (158 points) of 2,4-dimethyl-3-oxapentane (also known as di-isopropyl ether, DIPE) at seven temperatures between (293.15 and 393.29) K and 23 pressures from (0.1 to 140) MPa (every 5 or 10 MPa). An Anton Paar vibrating tube densimeter, calibrated with an uncertainty of ±0.7 kg · m−3, was used to perform these measurements. Values of the experimental density were fitted with the Tait-like equation with low standard deviations. In addition, the isobaric thermal expansivity and the isothermal compressibility have been derived from the Tait-like equation.
Journal: The Journal of Chemical Thermodynamics - Volume 80, January 2015, Pages 135–141