کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
218515 | 463205 | 2015 | 8 صفحه PDF | دانلود رایگان |

• Porous Cu–Fe foams were successfully electrodeposited using the H2 bubble template.
• They were studied as supercapacitor electrodes and have a pseudocapacitive response.
• Foams thermally conditioned at 150 °C showed a specific capacitance of 297 Fg−1.
• Cu–Fe foams presented a good capacitance retention in long term cycling tests.
Copper–iron (Cu–Fe) 3D porous foams for supercapacitor electrodes were electrodeposited in the cathodic regime, on stainless steel current collectors, using hydrogen bubbling dynamic template. The foams were prepared at different current densities and deposition times. The foams were submitted to thermal conditioning at temperatures of 150 and 250 °C. The morphology, composition and structure of the formed films were studied by SEM, EDS and XRD, respectively. The electrochemical behaviour was studied by cyclic voltammetry, electrochemical impedance spectroscopy and chronopotentiometry.The morphology of the 3D Cu–Fe foams is sensitive to the electrodeposition current and time. The increase of the current density produces a denser, larger and more ramified dendritic structure. Thermal conditioning at high temperature induces a coarser grain structure and the formation of copper oxides, which affect the electrochemical behaviour.The electrochemical response reveals the presence of various redox peaks assigned to the oxidation and reduction of Cu and Fe oxides and hydroxides in the foams. The specific capacitance of the 3D Cu–Fe foams was significantly enhanced by thermal conditioning at 150 °C. The highest specific capacitance values attained 297 Fg−1 which are much above the ones typically observed for single Cu or Fe oxides and hydroxides. These values highlight a synergistic behaviour resulting from the combination of Cu and Fe in the form of nanostructured metallic foams. Moreover, the capacitance retention observed in an 8000 charge/discharge cycling test was above 66%, stating the good performance of these materials and its enhanced electrochemical response as supercapacitor negative electrodes.
Figure optionsDownload as PowerPoint slide
Journal: Journal of Electroanalytical Chemistry - Volume 737, 15 January 2015, Pages 85–92