کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
219953 | 463307 | 2010 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Ultrasensitive determination of tungsten(VI) on pikomolar level in voltammetric catalytic adsorptive catechol-chlorate(V) system Ultrasensitive determination of tungsten(VI) on pikomolar level in voltammetric catalytic adsorptive catechol-chlorate(V) system](/preview/png/219953.png)
The renewable mercury film electrode, applied for the determination of tungsten(VI) ultra traces using differential pulse catalytic adsorptive cathodic stripping voltammetry (DPCAdSV) with presence of catechol as a ligand and chlorate(V) is presented. The calibration graph obtained for W(VI) is linear from 0.025 nM (4.5 ng L−1) to 130 nM (23.9 μg L−1) for a preconcentration time of 30 s, with correlation coefficient of 0.9989. For the renewable mercury electrode (Hg(Ag)FE) with a surface area of 4.4 mm2 the detection limit for a preconcentration time of 60 s is as low as 0.2 ng L−1. The repeatability of the method at a concentration level of the analyte as low as 0.09 μg L−1, expressed as RSD is 3.1% (n = 5). The proposed method was successfully applied and validated by studying the certified reference material CTA-VTL-2 and simultaneously recovery of W(VI) from spiked water samples.
Journal: Journal of Electroanalytical Chemistry - Volume 644, Issue 1, 15 May 2010, Pages 74–79