کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
28034 44056 2008 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Post-modification using aluminum isopropoxide after dye-sensitization for improved performance and stability of quasi-solid-state solar cells
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی بیو مهندسی (مهندسی زیستی)
پیش نمایش صفحه اول مقاله
Post-modification using aluminum isopropoxide after dye-sensitization for improved performance and stability of quasi-solid-state solar cells
چکیده انگلیسی

In this study, dye-sensitized TiO2 electrodes were immersed into a solution of aluminum isopropoxide and after hydrolysis quasi-solid-state solar cells were fabricated. The interaction between the dye and the resulting Al2O3 overlayer was investigated by ultraviolet–visible (UV–vis) spectrum, Fourier transform infrared (FTIR) spectrum and X-ray photoelectron spectrum (XPS). The current density–voltage (I–V) characteristics showed that the overlayer increased the photovoltage and decreased the photocurrent under low intensity irradiation, and increased both the photovoltage and photocurrent under AM 1.5 irradiation. The Al2O3 overlayer at the dye/electrolyte interface resulted in a 28% improvement in overall photo-to-electrical conversion efficiency from 2.60 to 3.32%. Dark current measurements showed that Al2O3 acted as an insulator barrier to retard recombination between the TiO2 and dye/quasi-solid-state electrolyte interface. Without encapsulation, dye-sensitized solar cells with Al2O3 coating after sensitization also exhibited improved stability compared to cells without coating.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Photochemistry and Photobiology A: Chemistry - Volume 197, Issues 2–3, 25 June 2008, Pages 375–381
نویسندگان
, , , ,