Development of new transition metal oxide catalysts for the destruction of PCDD/Fs

• Various transition metal oxide catalysts are developed for PCDD/Fs destruction.
• Multi-metallic VOx/TiO2 catalysts are also investigated to destroy PCDD/Fs.
• A PCDD/Fs generating system is installed to supply PCDD/Fs steam with stable concentration.
• Chemical states of various metals in the fresh and used catalysts are discussed.

Various transition metal oxide and vanadium-containing multi-metallic oxide catalysts were developed for the destruction of PCDD/Fs (polychlorinated dibenzo-p-dioxins and furans). A stable PCDD/Fs generating system was installed to support the catalytic destruction tests in this study. Nano-titania supported vanadium catalyst (VOx/TiO2) showed the highest activity, followed by CeOx, MnOx, WOx and finally MoOx. Multi-metallic oxide catalysts, prepared by doping WOx, MoOx, MnOx and CeOx into VOx/TiO2 catalysts, showed different activities on the decomposition of PCDD/Fs. The highest destruction efficiency of 92.5% was observed from the destruction test over VOxCeOx/TiO2 catalyst. However, the addition of WOx and MoOx even played a negative role in multi-metallic VOx/TiO2 catalysts. Characterizations of transition metal oxides and multi-metallic VOx/TiO2 catalysts were also investigated with XRD and TPR. After the catalysts were used, the conversion from high valent metals to low valence states was observed by XPS.

Figure optionsDownload as PowerPoint slide