Higher intrinsic photocatalytic efficiency of 2,4,6-triphenylpyrylium-based photocatalysts compared to TiO2 P-25 for the degradation of 2,4-dichlorophenol using solar simulated light

The photocatalytic efficiency of two 2,4,6-triphenylpyrylium (TP+) based photocatalysts (supported on silica or incorporated inside zeolite Beta, 3 wt%) for the degradation of 2,4-dichlorophenol (DCP) in aqueous media has been compared with TiO2 (Degussa P-25). It was found that the efficiency of the degradation depends on the photocatalytic setup, recirculation through a tubular reactor being highly unfavorable for the TP+-based photocatalysts due to the deposition of the silica or zeolite particles. In contrast, high efficiency in DCP disappearance (up to 87%) and in the total organic content decrease (up to 62%) were obtained using a discontinuous batch reactor in which the TP+ photocatalysts were uniformly suspended. Kinetic studies were also made and DCP degradation follows a first order kinetics. The obtained kinetic constants when corrected to account for the influence of the fraction of light absorbed and the amount of active sites shows that the intrinsic activity of TP+ adsorbed on silica or incorporated inside zeolite Beta was over one order of magnitude higher than TiO2 activity.