Effect of void structure of photocatalyst paper on VOC decomposition

TiO2 powder-containing paper composites, called TiO2 paper, were prepared by a papermaking technique, and their photocatalytic efficiency was investigated. The TiO2 paper has a porous structure originating from the layered pulp fiber network, with TiO2 powders scattered on the fiber matrix. Under UV irradiation, the TiO2 paper decomposed gaseous acetaldehyde more effectively than powdery TiO2 and a pulp/TiO2 mixture not in paper form. Scanning electron microscopy and mercury intrusion analysis revealed that the TiO2 paper had characteristic unique voids ca. 10 μm in diameter, which might have contributed to the improved photocatalytic performance. TiO2 paper composites having different void structures were prepared by using beaten pulp fibers with different degrees of freeness and/or ceramic fibers. The photodecomposition efficiency was affected by the void structure of the photocatalyst paper, and the initial degradation rate of acetaldehyde increased with an increase in the total pore volume of TiO2 paper. The paper voids presumably provided suitable conditions for TiO2 catalysis, resulting in higher photocatalytic performance by TiO2 paper than by TiO2 powder and a pulp/TiO2 mixture not in paper form.