کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
45315 46409 2014 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Highly productive iron molybdate mixed oxides and their relevant catalytic properties for direct synthesis of 1,1-dimethoxymethane from methanol
ترجمه فارسی عنوان
اکسید مخلوط مولیبدن آهن بسیار مولد و خواص کاتالیزوری مرتبط آن برای سنتز مستقیم 1،1-دی متئوکسیمانت از متانول
کلمات کلیدی
اکسیداسیون متانول، استالیزاسیون، 1،1-دمتوکسی متیل، کاتالیزور مولیبدن آهن
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی کاتالیزور
چکیده انگلیسی

The one-step gas phase conversion of methanol to 1,1-dimethoxymethane (DMM) was studied over highly productive iron molybdate mixed oxides in a fixed-bed reactor working at atmospheric pressure. When placing the Fe–Mo–O catalyst under a reaction mixture highly concentrated in methanol, the DMM selectivity was drastically boosted. This specific and unique feature encouraged us to extensively characterize this family of particular catalysts. LEIS analysis revealed the presence of both Mo and Fe species on the outermost atomic layer of the catalysts. X-ray photoelectron spectroscopy (XPS) and in situ EPR measurements showed that the Fe centres are responsible for the redox properties. The acidic properties of the FeMo mixed oxides were then attributed to anionic vacancies acting as Lewis acid sites produced by dehydroxylation of the catalyst surface. XPS analysis also showed that oxygen from the gas phase was responsible for reoxidation of the catalyst surface with regeneration of the active sites, which suggests a Mars–van Krevelen mechanism. The good catalytic performances were then attributed to a synergistic effect between Mo and Fe species. A Mo/Fe molar ratio of 3.2 for an optimal remarkable yield in DMM of 50% was found.

The use of Fe2(MoO4)3–MoO3 mixed oxides for the productive synthesis of DMM using a methanol-rich feed was demonstrated herein. Remarkably high performance is attributed to proper redox and acidic functions which are adequately balanced. Fe centres are responsible for redox ability and acidity is brought by anionic vacancies.Figure optionsDownload as PowerPoint slideHighlights
► Highly efficient FeMo mixed oxides were reported for DMM production from methanol.
► A synergistic effect between Mo and Fe species was clearly observed.
► Active sites involve anionic vacancies intimately incorporating Mo and Fe cations.
► Good performance is owing to proper redox and acid functions adequately balanced.
► Fe centres are responsible for redox ability and acidity is brought by vacant sites.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Catalysis B: Environmental - Volume 145, February 2014, Pages 126–135
نویسندگان
, , , , , , , , , , , , ,