کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4768920 | 1425388 | 2017 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Characterization of cold densified rice straw briquettes and the potential use of sawdust as binder
ترجمه فارسی عنوان
مشخص کردن بریکت های نی کاه برنج سرد و استفاده بالقوه از خاک اره به عنوان گیرنده
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
نی نی خاک اره، فشرده سازی سرد پیستون پرس، فشار فشرده سازی، قطر قالب شاخص انفجار،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
چکیده انگلیسی
This study investigated the effect of particle size, pressure and mold diameter on the physical characteristics of rice straw briquettes. The briquettes were prepared utilizing a manually operated piston-press cold densification system and analyzed in terms of initial density, stable density, density ratio, compaction ratio, percentage of volume change, shatter index and energy consumption. Reduction of mold diameter significantly (p < 0.05) improved briquettes stable density and reduced compaction pressure requirement. Particles of < 2.5 mm or 0.1-150 mm, pressure â¥Â 27.6 MPa and mold diameter of â¤Â 51 mm should be used to prepare cold densified rice straw briquettes of higher stable density and durability. Interestingly, the briquettes of 0.1-150 mm particles showed significantly (p < 0.05) higher shatter index of > 0.90 even at lower pressure at a cost of stable density. The use of sawdust as binding material at 3:1 and 1:1 mixing ratios increased briquettes stable density > 600 kg/m3, improved shatter index significantly (p < 0.05), increased heating value by 6-7.2%, and reduced ash content from 13.61% to 10.3% and 6.93%, respectively. The energy consumed for briquette preparation accounted 5.6-7.5% and 11.1-13% of the energy which was stored in rice straw briquettes for large and small mold respectively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel Processing Technology - Volume 158, April 2017, Pages 9-19
Journal: Fuel Processing Technology - Volume 158, April 2017, Pages 9-19
نویسندگان
Sheikh Aminur Rahaman, P. Abdul Salam,