کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4910303 1427612 2016 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Experimental study on non-linear behavior of breakage rates due to fines generation in wet batch milling
ترجمه فارسی عنوان
بررسی تجربی بر رفتار غیر خطی میزان شکستگی ناشی از تولید جرم در خاکستری مرطوب
کلمات کلیدی
ترجمه چکیده
مکانیزم سنگ زنی مرطوب هنوز هم جالب است و برآورد بهتر سینتیک سنگ زنی مزایای بیشتری را در زمینه صرفه جویی در انرژی فراهم می آورد. هدف اصلی این مقاله، بررسی دلایل و عوامل ایجاد کننده عدم تغییرات در میزان شکست در سیستم های آسیاب مرطوب است. در آسیاب توپ، نرخ شکستن به طور عمده با توزیع اندازه پودر تولید شده در آسیاب متفاوت است. در این کار به منظور بررسی بینش دقیق در مورد مکانیزم آسیاب در عملیات آسیاب خرد کردن، در این مقاله به بررسی سینتیک شکست خورده 1 و 2 پرداخته شده است. برای ارزیابی پارامترهای سرعت شکست استفاده شده است: روش ورودی تجمعی و روش ورودی افزایشی. این روش ها در مقایسه با یکدیگر برای درک بهتر این است که چگونه میزان شکست در حال تکامل است. سه نوع مختلف سنگ معدن به عنوان خوراک طبیعی و یکنواخت استفاده می شود. نتایج حاصل از هر دو روش به وضوح توضیح داده شده است. توابع انتخابی دوم مرتبه، بر اساس ورودی های افزایشی انرژی خاص، غیر خطی ذاتی در روند مرطوب مرطوب نمایش داده می شود. مشاهده شد که میزان شکستگی با اندازه متفاوت در آسیاب برای هر سه نوع کانسار مشاهده شد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی
The mechanism of wet grinding is still an object of interest and the better estimation of grinding kinetics provides greater benefits in terms of energy saving. The primary objective of this paper is to investigate reasons and causative factors contributing to nonlinearities in breakage rates for wet grinding systems. In ball milling the breakage rates vary mainly with the size distribution of the powder generated in the mill. 1st order and 2nd order breakage kinetics have been considered in this work to provide detailed insight into the mechanism of milling during wet grinding operations. Two methods have been used for breakage rate parameter estimation: cumulative input procedure and incremental input procedure. These methods are compared against each other to get a better understanding of how breakage rates evolve. Three different ore types are used as natural and monosized feeds. Results derived from both methods have been lucidly explained. The 2nd order specific selection functions, based on incremental inputs of specific energy, displayed inherent nonlinearities in the wet grinding process. It was observed that the breakage rates varied with the size consist in the mill for all three ore types.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Minerals Engineering - Volume 99, December 2016, Pages 19-29
نویسندگان
, , ,