کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4919824 | 1429077 | 2017 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Infill walls with confining elements and horizontal reinforcement: An experimental study
ترجمه فارسی عنوان
دیوارهای تزئینی با عناصر محدود و تقویت افقی: یک مطالعه تجربی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
ترجمه چکیده
یک بررسی تجربی از رفتار جهانی قابهای بتنی با دیوارهای سنگ تراشی انجام شد. متغیرهای مطالعه، نسبت سفتی دیوار / قاب، استفاده از عناصر محدود و استفاده از تقویت افقی بود. شش نمونه معادل 1: 2 مورد آزمایش قرار گرفتند. نتایج نشان می دهد که نسبت سفتی دیوار / قاب اثر مهمی بر مقاومت ترک خوردگی دیواره ها و حداکثر مقاومت برشی سیستم دارد. علاوه بر این، کمک تقویت افقی به قدرت جانبی به نسبت سفتی دیوار / قاب بستگی دارد. محصور کردن عناصر اطراف دیواره های پرچین، قدرت جانبی و ظرفیت جابجایی سیستم را افزایش نمی دهد؛ با این حال، آنها ثبات خارج از هواپیما دیوار و شرایط تماس بین دیوار و قاب را افزایش می دهد.
موضوعات مرتبط
مهندسی و علوم پایه
علوم زمین و سیارات
مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
An experimental investigation of the global behavior of reinforced-concrete frames infilled with masonry walls was conducted. The study variables were the wall/frame stiffness ratio, the use of confining elements and the use of horizontal reinforcement. Six specimens scaled 1:2 were tested. The results indicate that the wall/frame stiffness ratio has an important effect on the cracking strength of the walls and the maximum shear strength of the system. Moreover, the contribution of horizontal reinforcement to lateral strength depends on the wall/frame stiffness ratio. Confining elements surrounding the infill walls do not increase the lateral strength or displacement capacity of the system; however, they enhance the out-of-plane stability of the wall and the contact conditions between the wall and frame.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Structures - Volume 150, 1 November 2017, Pages 153-165
Journal: Engineering Structures - Volume 150, 1 November 2017, Pages 153-165
نویسندگان
J.M. Leal G., J.J. Pérez Gavilán, J.H. Castorena G., J.I. Velázquez D.,