کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4920314 1429089 2017 13 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Response of roof beams in buildings subject to blast loading: Analytical treatment
ترجمه فارسی عنوان
پاسخ تیرهای سقف در ساختمان هایی که بار انفجار دارند: درمان تحلیلی
کلمات کلیدی
انفجار بارگیری، سازه های ساختمان، پرتوهای سقف، بار یکنواخت برابر، موج حرکتی، تجزیه و تحلیل پویا،
ترجمه چکیده
در میان بارهای جانبی که ساختار ساختمان ممکن است تجربه شود این است که توسط انفجار از انفجار ساخته شده است. تجزیه و تحلیل پاسخ ساختار ساختمان به بار انفجار به طور سنتی بر اساس یک عضو انجام می شود. مقدار و تنوع بار انفجار با زمان بستگی به موقعیت عضو در نظر گرفته شده در ساختمان دارد. ماهیت چنین بارهایی برای چهره جلو، چهره های جانبی، سقف و چهره پشتی ساختمان متفاوت است. به طور خاص، بار برای سقف و اعضای صورت که در جهت عمود بر جبهه ضربه قرار دارند، هر دو به صورت فضایی و زمانی به نحوی پیچیده تغییر می کنند. در عمل جاری، چنین بارهایی با یک بار معادل نشان داده شده است که فضایی یکنواخت است اما با زمان متفاوت است. سقف یا عضو سمت چهره همراه با بار اعمال شده بر روی آن، تبدیل به یک سیستم درجه یک آزادی می شود که تجزیه و تحلیل آن پارامترهای پاسخ مورد نظر مانند انحراف و استرس را فراهم می کند. در این مقاله نشان داده شده است که روش های کنونی نتایج بسیار متفاوتی را ارائه می دهند که دقت آنها به صورت مشکوک است. روشی که نمایش بهتری از تغییرات بار را فراهم می کند و یک روش دقیق تر تجزیه و تحلیل ارائه شده است. پیاده سازی این روش از طریق یک برنامه کامپیوتری که برای این منظور طراحی شده است انجام شده است و نشان داده شده است که کل فرآیند به همان اندازه تکنیک های موجود براساس نمایندگی یک درجه آزادی است.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
Among the lateral loads that a building structure may experience is that produced by blast from an explosion. The analysis of the response of building structure to blast loads is traditionally carried out on a member-by-member basis. The magnitude and variation of blast load with time depends on the position of the member being considered in the building. The nature of such loads is different for the front face, the side faces, the roof, and the rear face of the building. In particular, loads for the roof and side face members that span in a direction perpendicular to the shock front vary both spatially and temporally in a complicated manner. In the current practice, such loads are represented by an equivalent load that is spatially uniform but varies with time. The roof or the side face member along with the load acting on it is then converted to a single-degree-of-freedom system, whose analysis provides the desired response parameters, such as deflections and stresses. It is shown in this paper that the current methodologies provide widely differing results whose accuracy is suspect. A method that provides a better representation of the load variations and a more accurate procedure of analysis is presented. The implementation of the method is carried out through a computer program developed for the purpose and it is demonstrated that the entire process is as simple as the present techniques based on a single-degree-of-freedom representation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Structures - Volume 138, 1 May 2017, Pages 50-62
نویسندگان
, , ,