کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4920534 | 1429092 | 2017 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Flexural behaviour and capacity of reinforced concrete-steel composite beams with corrugated web and top steel flange
ترجمه فارسی عنوان
رفتار انعطاف پذیر و ظرفیت تیرهای کامپوزیتی بتن مسلح با ورقه های راه و فلنج فولادی بالا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
پرتو کامپوزیت فلنج فولادی بالا وب کم ظرفیت انعطاف پذیری، مکانیسم شکست
ترجمه چکیده
در این مقاله یک بررسی تجربی از رفتار پرتوهای کامپوزیتی بتن آرمه / فولادی با ورقه های راه راه تحت خمش قرار داده شده است. این مطالعه بر اثر فلان فولادی بالا بر روی مکانیسم شکست مکانیکی پرتو بتن / فولاد تمرکز دارد. بر این اساس، چهار فولاد جامد کامپوزیت بتنی / فولاد ساخته و آزمایش می شوند. دو پرتو فلنج بتن و فولادی است که شامل اتصالات برشی است. پرتو های دیگر دارای اتصالات بتنی تنها با اتصالات برشی و مش فولادی اضافی است. تمام نمونه ها در نقاط تقسیم طول پرتو به یک سوم بارگذاری می شوند. در نتیجه، برش صفر و مناطق لحظه ثابت با این توزیع بارگذاری در قسمت سوم نمونه ها ایجاد می شود. هر دو مکانیسم شکست محلی و جهانی تحت تأثیر ترکیب فلنج فولادی قرار دارند. علاوه بر این، اثرات فلنج فولادی بالا بر روی سختی پرتو، بار نهایی، لرزش محلی ورق موجدار، لغزش بتن و سازوکار شکست بتن مورد بحث قرار گرفته است.
موضوعات مرتبط
مهندسی و علوم پایه
علوم زمین و سیارات
مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
An experimental investigation of the behaviour of composite reinforced-concrete/steel beams with corrugated webs under flexure is presented in this paper. This study focuses on the effect of a top steel flange on the failure mechanism of a composite concrete/steel beam. Accordingly, four full-scale composite concrete/steel beams are fabricated and tested. Two beams have concrete and steel flanges that consist of shear connectors. The other beams have concrete-only flanges with shear connectors and additional steel mesh. All specimens are loaded at points dividing the beam length into thirds. Consequently, the zero shear and constant moment regions are created by this loading distribution in the middle third of the specimens. Both the local and global failure mechanisms are influenced by the top steel flange composition. Moreover, the effects of the top steel flange on the beam stiffness, ultimate load, local buckling of the corrugated web, concrete slip, and failure mechanism of the concrete slab are discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Structures - Volume 135, 15 March 2017, Pages 136-148
Journal: Engineering Structures - Volume 135, 15 March 2017, Pages 136-148
نویسندگان
A. Elamary, M.M. Ahmed, A.M. Mohmoud,