کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4977889 1452104 2017 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Pre-stressed rubber material constant estimation for resilient wheel application
ترجمه فارسی عنوان
برآورد ثابت لاستیک قبل از استرس برای استفاده از چرخ متحرک
کلمات کلیدی
شناسایی، لاستیک، ثابت انعطاف پذیر چسبندگی قبل از مطبوعات، بارگذاری پویا،
ترجمه چکیده
این مقاله روش و نتایج محاسبات مدول بر مبنای بخش های لاستیکی بین دیسک و لبه یک چرخ راه آهن راننده لاستیکی را توصیف می کند. راه حل از روش پیشنهادی و اعتبار سنجی در شناسایی پایانه لاستیکی در مورد فولاد با لایه لاستیکی است. در محدوده خاصی، وابستگی آن به مدول جوان، به صورت کوانسیلیار است و می تواند به طور موثر با روش گرادینت حل شود. رفتار مشابهی نیز برای وابستگی ثابت محدوده مودل به ضریب دمایی نشان داد. نتایج ثابت شده از ثابت های لاستیکی تنظیم شده، یعنی مدول کشش و ضریب تلفات بخش های لاستیکی ریل، برای پیش بینی رفتار مودال چرخ های مقاوم در برابر جدید بسیار ارزشمند است و به لحاظ کیفی مطابق با رفتار رغبت های سنتزی سخت .
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر نرم افزار
چکیده انگلیسی
This paper describes the methodology and results of the complex modulus estimation of rubber segments pressed between the disk and the rim of a rubber-damped railway wheel. The solution comes out from the method proposed and validated at rubber constant identification on the case of the steel beam with rubber layer. In the vicinity of eigenfrequency its dependence to Young modulus is quasilinear and can be solved effectively by the gradient method. The similar behavior showed itself also for dependence of the modal damping constant on the damping coefficient. The ascertained results of tuned rubber material constants, i.e. the modulus of elasticity and a loss factor, of the rail rubber segments are very valuable for prediction of modal behavior of the new resilient wheels and they are qualitatively in accordance with the behavior of hard synthetic rubbers.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Advances in Engineering Software - Volume 113, November 2017, Pages 76-83
نویسندگان
, , , , , ,