کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4991070 1457108 2017 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Thermodynamic analysis for recuperation in a scramjet nozzle with wall cooling
ترجمه فارسی عنوان
تجزیه و تحلیل ترمودینامیکی برای احیاء در یک نازل اسکرمانتیک با خنک کننده دیواری
ترجمه چکیده
در این مقاله یک تحلیل ترمودینامیکی برای احیاء در یک نازل اسکرمانتیک با خنک کننده دیواری تکمیل شد. فرایند توسعه با بازسازی با استفاده از هر دو نمودار و معادلات توصیف شد. یک مدل توسعه شبه یک بعدی و همراه با خنک کننده دیواری برای حمایت از توصیف فرایند توسعه با احیاء، که شامل دو فرم، یعنی نازل کاملا سرد شده و نازل بخار شده بود، توسعه یافت. نتایج نشان می دهد که فرآیند احیاء که توسط خنک کننده دیواری در نازل حاصل می شود، به طور بالقوه می تواند عملکرد اسکرمایت ها را به طور موثر بهبود بخشد. برای هر دو شکل نازل، دمای اگزوز و نسبت مساحت نازل با استفاده از بازدهنده کاهش می یابند و در عین حال سرعت اگزوز نیز افزایش می یابد، زمانی که گرما بیشتر به سوختگی منتقل می شود. دستاوردهای ضربه مخصوص به ترتیب 16.24٪ و 22.57٪ برای نازل کاملا خنک و نازل بخار بخار به ترتیب، اگر اثر بخشی بازدهنده می تواند تا 30٪ برسد. هنگامی که هیچ گونه حفاظت حرارتی را نیافتید، نازل بخار نیمه دارای پتانسیل بالاتری نسبت به نازل کاملا خنک است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
A thermodynamic analysis for recuperation in a scramjet nozzle with wall cooling was completed in this paper. The expansion process with recuperation was descripted using both diagrams and equations. A quasi-one-dimensional expansion model coupled with wall cooling was developed to support the description of the expansion process with recuperation, which consisted of two forms, namely, the fully cooled nozzle and the partially cooled nozzle. The results show that the recuperation process achieved by wall cooling in the nozzle has the potential to improve the performance of scramjets effectively. For both of two nozzle forms, the exhaust temperature and the area ratio of nozzle decrease with the regenerator effectiveness, and meanwhile the exhaust velocity increases when more heat is transferred back to combustor. The gains of specific impulse will be 16.24% and 22.57% for the fully cooled nozzle and the partially cooled nozzle respectively, if the regenerator effectiveness can reach to 30%. When taking no account of the thermal protection, the partially cooled nozzle has a greater potential than the fully cooled nozzle.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 121, 5 July 2017, Pages 153-162
نویسندگان
, , , , , , ,