کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4992068 1457119 2017 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Thermocline characteristics of molten-salt thermal energy storage in porous packed-bed tank
ترجمه فارسی عنوان
خصوصیات ترموکلیشن ذخیره انرژی حرارتی مولد نمک در مخزن بسته بندی شده متخلخل
کلمات کلیدی
نمک مذاب، ذخیره انرژی حرارتی، تخت بسته بندی شده، ترموکلاین،
ترجمه چکیده
بر اساس نظریه تعادل حرارتی محلی در رسانه های متخلخل، یک مدل عددی دو بعدی برای بررسی فرایندهای ذخیره سازی گرما و فرایند گرمادهی گرماسیکلین مذاب در مخزن بسته بندی شده متخلخل تولید شده است. مدل عددی با مقایسه نتایج شبیه سازی با داده های تجربی معتبر است. عملکرد سیستم ذخیره سازی حرارت با استفاده از ضخامت ترموکلاس و ذخیره سازی ذخیره گر با تمرکز بر تعادل انرژی تجزیه و تحلیل می شود. نتایج نشان می دهد که لایه های پایدار ترموکلاین ممکن است در طول فرآیند ذخیره یا ذخیره سازی حرارت ایجاد شوند. با توجه به وجود ترموکالین و جایگزینی پرکننده های متخلخل، بازده ذخیره سازی حرارت در مخزن بسته بندی شده متخلخل کمی پایین تر از ذخیره گرما حرارت گرم نمک خالص است. ظرفیت حرارتی حجمی رسانه متخلخل عامل اصلی عملکرد ذخیره سازی حرارت است. بهبود عملکرد پرکننده متخلخل و تنظیم شرایط جریان نسبتا کوچک، می تواند کنترل بهینه ترککلین را در فرآیند ذخیره و خروج گرما فعال کند و کارایی حرارتی سیستم ذخیره حرارتی را بهبود بخشد که نشانگر جهت تحقیقات بیشتر است .
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
Based on the local thermal equilibrium theory in porous media, a two-dimensional numerical model is developed to investigate the heat storage and heat release processes of a molten-salt thermocline in a porous packed-bed tank. The numerical model is validated by comparing the simulation results with the experimental data. The performance of the heat storage system is analyzed using the thermocline thickness and the heat storage efficiency with a focus on energy balance. The results show that stable thermocline layers can form during heat storage or heat release processes. Because of the existence of the thermocline and replaced porous fillers, the heat storage efficiency in a porous packed-bed tank is slightly lower than that of pure molten-salt thermocline heat storage. The volumetric heat capacity of porous media is a key factor in heat storage performance. Improving the performance of the porous filler and setting the condition of a reasonably low flow rate, it can enable optimization control of the thermocline evolution in heat storage/release processes and improve the thermal efficiency of the heat storage system, which reveals directions for further research.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 110, 5 January 2017, Pages 855-863
نویسندگان
, , , ,