A magnetic field-directed self-assembly solid contact for construction of an all-solid-state polymeric membrane Ca2+-selective electrode

- A magnetic field-directed self-assembly strategy is proposed to prepare the solid contact.
- The solid contact is fabricated by physically adsorbing magnetic graphene powder on a magnetic gold electrode.
- The proposed method is simple, fast and general as compared to the multilayer drop-casting and electrodeposition methods.

A magnetic field-directed self-assembly solid contact has been proposed for developing an all-solid-state polymeric membrane Ca2+-selective electrode. The solid contact is prepared by physically adsorbing magnetic graphene powder on a magnetic gold electrode under the direction of the magnetic field. The proposed method for preparing solid contact avoids using the aqueous solutions and is simple, fast and general as compared to the multilayer drop-casting and electrodeposition methods. The all-solid-state Ca2+-selective electrode based on magnetic graphene as solid contact shows a stable potential response in the linear range of 1.0 × 10−6-1.0 × 10−3 M with a slope of 28.2 mV/decade, and the detection limit is about 4.0 × 10−7 M. Additionally, the magnetic graphene-based electrode shows a comparable potential stability performance to other graphene-based all-solid-state ion-selective electrodes, such as reduced undesirable water layer and insensitive to the interferences of O2, CO2 and light. This work provides a favorable way to prepare solid contact for use in the field of all-solid-state ion-selective electrodes.

144