Phase separation of poly (methyl methacrylate) / poly (styrene-co-acrylonitrile) blends in the presence of silica nanoparticles

The effects of silica nanoparticles on the phase separation of poly (methyl methacrylate)/poly (styrene-co-acrylonitrile) (PMMA/SAN) blends are studied by the rheological method. The binodal temperatures of near-critical compositions were obtained by the gel-like behavior during spinodal decomposition, which is a character of polymer blends with co-continuous morphology. The shifted Cole-Cole plot method was introduced to determine the binodal temperatures of off-critical compositions based on the appearance of shoulder-like transition in the terminal regime of blends with droplet morphology. Such method is found also applicable in nanoparticle filled polymer blends. Moreover, a new method to determine the spinodal temperature from Fredrickson-Larson mean field theory was suggested, where the concentration fluctuation's contribution to the storage modulus is used instead of the whole dynamic moduli. This method was also successfully extended to nanoparticle filled polymer blend. The influences of the concentration and the average diameter of silica particles on the phase separation temperature were studied. It was found that the small amount of the silica nanoparticles in PMMA/SAN blends will significantly change the phase diagram, which is related to the selective location of silica in PMMA. The comparisons with thermodynamic theory of particle-filled polymer blends are also discussed.