کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5190748 | 1381216 | 2005 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of molecular parameters on high-strain deformation of polyethylene in the plane-strain compression. Part I. Stress-strain behavior
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
شیمی آلی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The samples of polyethylenes and copolymers were subjected to high-strain compression in the plane-strain conditions. The true strain exceeded frequently the value of 2 (a corresponding deformation ratio up to around 10). Plastic deformation to high strain was associated with an intense strain-hardening, leading to very high stress, above 500Â MPa. It was found that the yield behavior and the stress of plastic flow depended mainly on the amount of amorphous and crystalline components and on the thickness of lamellar crystals, while the strain hardening behavior depended primarily on the density of chain entanglements in the amorphous component, which in turn was controlled by molecular mass and chain architecture of the polymer, both influencing the process of network modification upon crystallization.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Polymer - Volume 46, Issue 19, 8 September 2005, Pages 8210-8221
Journal: Polymer - Volume 46, Issue 19, 8 September 2005, Pages 8210-8221
نویسندگان
Z. Bartczak, M. Kozanecki,