Effects of thermal ageing on mechanical and thermal behaviors of linear low density polyethylene pipe

The mechanical and thermal behaviors of linear low density polyethylene (LLDPE) pipe with variation in thermal exposure time were studied. The prolongation of thermal exposure time leads to a progressive increase, until 6000 h, in tensile strength and a slight increase in hardness, while a proportional decrease in elongation at break. These results can be explained by the increase of crystallinity, followed by the increase of crosslinking density and the decrease in chain mobility due to thermal oxidation as the exposure time increases. The additional ageing to the antioxidant-depleted LLDPE pipe induces the formation of T2 endotherm, which leads to a negative effect in mechanical properties. Long-term hydrostatic pressure test result implies the existence of transition point from ductile to brittle fracture in terms of the thermal exposure time. Chemiluminescence (CL) and oxidation induction time (OIT) tests are employed to monitor the thermo-oxidative degradation of LLDPE pipe. The CL emission intensity increases with increasing with thermal exposure time. Furthermore, the OIT result suggests that after 6000 h of the thermal ageing, the depletion of antioxidant originally added in LLDPE pipe occurs. Fourier transform-infrared spectroscopy results show the increase of carbonyl (-CO) and hydroxyl (O-H) function groups on the surface of thermally exposed LLDPE pipe. This result suggests that the hydrocarbon groups locally undergo the oxidation on the LLDPE surface due to thermal degradation.