کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5205460 | 1502930 | 2017 | 31 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Impact fracture toughness and flow properties of polypropylene composites
ترجمه فارسی عنوان
خواص چسبندگی و خواص جریان کامپوزیت پلی پروپیلن
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
کامپوزیت پلیمر ماتریس، قدرت ضربه، رئوئولوژی، اکستروژن، مرفولوژی،
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
شیمی آلی
چکیده انگلیسی
The impact fracture strength, melt volume flow rate (MVR) and melt density of polypropylene composites filled separately with two flame retardants (aluminum hydroxide and magnesium hydroxide), zinc borate (ZB), polyolefin elastomer (POE) and nanometer calcium carbonate (nano-CaCO3) were measured to identify the effects of the flame-retardant content on the flow properties and impact fracture toughness. The results showed that the MVR decreased with increasing flame-retardant weight fraction (Ïf) while it increased with increasing load; the melt density increased approximately linearly with increasing Ïf while the influence of the ZB, nano-CaCO3, POE and load on the melt density was insignificant. The V-notched Izod impact strength increased when Ïf was lower than 30Â wt.%, then it decreased slightly with increasing Ïf. The value of the V-notched Izod impact strength reached a maximum at Ïf about 20Â wt.%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Polymer Testing - Volume 60, July 2017, Pages 381-387
Journal: Polymer Testing - Volume 60, July 2017, Pages 381-387
نویسندگان
Ji-Zhao Liang,