کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5206021 | 1502945 | 2015 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Melt flow behavior of polypropylene composites filled with multi-walled carbon nanotubes during extrusion
ترجمه فارسی عنوان
رفتار جریان ذوب کامپوزیت های پلی پروپیلن پر شده با نانولوله های کربنی چند جداره در طی اکستروژن
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
کامپوزیت پلیمر ماتریس، خواص رئولوژیکی، اکستروژن، جریان رزین،
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
شیمی آلی
چکیده انگلیسی
Polypropylene (PP) composites filled with multi-walled carbon nanotubes (MWCNTs) were prepared using a twin-screw extruder. The melt flow properties of the composites were measured with a capillary rheometer in a temperature range from 180 to 230 °C and at various apparent shear rates varying from 100 to 4000 sâ1. The results showed that the melt shear stress increased almost linearly while the melt shear viscosity decreased almost linearly with increasing shear rates in a bi-logarithmic coordinate system. The melt shear flow followed the power law relationship and the dependence of the melt shear viscosity on temperature obeyed the Arrhenius equation. The relationship between the melt shear viscosity and the MWCNT weight fraction was roughly linear under the investigated range of temperature or shear rate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Polymer Testing - Volume 45, August 2015, Pages 41-46
Journal: Polymer Testing - Volume 45, August 2015, Pages 41-46
نویسندگان
J.Z. Liang, C.Y. Chen, S.Y. Zou, C.P. Tsui, C.Y. Tang, S.D. Zhang,