Dynamic uniaxial extension of elastomers at constant true strain rate

Elastomers are widely used for damping components in various industrial contexts because of their remarkable dissipative properties: they can bear severe mechanical loading conditions, i.e., high strain rates and large strains. Depending on the strain rate, the mechanical response of these materials can vary from purely rubber-like to glassy. In the intermediate strain rate range (1-100/s), uniaxial extension experiments are classically conducted at constant nominal strain rate. We present here a new experimental methodology to investigate the mechanical response of soft materials at constant true strain rate in the intermediate strain rate range. For this purpose, the displacement imposed on the specimen by the tensile machine is an exponential function of time. A high speed servo-hydraulic machine is used to perform experiments at strain rates ranging from 0.01 to 100/s. A specific specimen is designed in order to achieve a uniform strain field (and thus a uniform stress field). Furthermore, an instrumented aluminium bar is used to measure the applied force; which overcomes the difficulties due to dynamic effects. Simultaneously, a high speed camera enables the measurement of strain in the sample using a point tracking technique. Finally, the method is applied to determine the stress-strain curve of an elastomer for both loading and unloading responses up to a stretch ratio λ = 2.5; the influence of the true strain rate on both stiffness and dissipation of the material is then discussed.