Mechanical testing of polystyrene/polystyrene laser welds

Two methods were selected for mechanical testing; a lap-joint shear test to evaluate the weld strength [kJ/m2] and a double cantilever beam (DCB) method to evaluate the critical strain release energy (GIc) [J/m2]. The shear test suggested constant weld strength of 21 kJ/m2 independent of laser heat input, while the DCB method resulted in varying GIc with an optimum at a laser power of 50 W and a laser speed of 153.8 mm/s. This difference was ascribed two different fracture mechanisms; chain rupture and chain pull-out.