کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5207020 | 1382332 | 2010 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Measurement of (post-)curing strain development with fibre Bragg gratings
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
شیمی آلی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Curing shrinkage of polymer matrices is a significant source of residual strain formation in thick composite products manufactured with liquid resin infusion. The goal of this paper is to investigate the contributions of cure shrinkage and postcure to residual strain development in a thermosetting polyurethane system suitable for resin infusion of thick composites using fibre Bragg gratings. The results showed that around half of the total shrinkage that contributes to residual strain build-up is due to chemical shrinkage, whereas the other half comprises thermal contraction from the vitrification point. The postcure treatment was found to relax internal strains significantly. The strain-free temperature was found below the postcure temperature and, therefore, the postcure treatment did not induce additional chemical or thermal strains.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Polymer Testing - Volume 29, Issue 3, May 2010, Pages 291-301
Journal: Polymer Testing - Volume 29, Issue 3, May 2010, Pages 291-301
نویسندگان
Patricia P. Parlevliet, Harald E.N. Bersee, Adriaan Beukers,